Radial Tonebone Bigshot MIX Wet-Dry Effects Loop Pedal
RRP $309.00
13% OFF
RRP $309.00
13% OFF
RA-BIGSHOT-MIX
RA-BIGSHOT-MIX
The BigShot MIX is an innovative pedal that lets you blend the original sound of your instrument with your effects pedals just like a studio mixer. For example on bass, this lets you add distortion while retaining the natural bottom end that is usually compromised when sending powerful bass frequencies through a pedal.
The MIX begins with 100% discreet, pure class-A circuitry to ensure the natural tone of the instrument is maintained. On the connector panel, a simple effects loop with send and return ¼" jacks make connecting easy. A 'set & forget' recessed MIX control lets you adjust the exact balance between your 'dry' sound and the 'wet' effect so that you can add just a hair of distortion or a full-on grunge attack depending on your mood! This is augmented with a 180° polarity reverse switch that ensures the wet and dry signals are in phase with each other.
Like all Radial pedals the MIX is made road ready with 14 gauge steel construction, dual wafer potentiometers, double sided PC board and a heavy duty footswitch. Simply add a standard Boss-style' 9V supply and you are set to go!
The Radial BigShot MIX... an effects loop that lets you control effects just like a recording console.
RADIAL TONEBONE BIGSHOT MIX APPLICATIONS
Most guitar pedals tend to roll off bass frequencies to provide dynamics in the mid range. The MIX lets you retain the full bass spectrum and mix in the effects without sacrificing bottom end. Simply set the level control to mix in the wet signal.
Studios create interesting effects by combining wet and dry signals together. This is called 'parallel processing'. The MIX lets you do this with guitars. Imagine using distortion and only adding chorus to the top end. Creative products spur on new ideas and music!
Combine your clean acoustic guitar with a multi-effects processor to create exciting musical landscapes. The MIX retains the natural sound of your acoustic for better dynamics, less noise and a more pleasing tone. Set the effects out of phase for wide 'space-like' effects.
| SKU | RA-BIGSHOT-MIX |
| Barcode # | 676101036936 |
| Brand | Radial Engineering |
The BigShot MIX is an innovative pedal that lets you blend the original sound of your instrument with your effects pedals just like a studio mixer. For example on bass, this lets you add distortion while retaining the natural bottom end that is usually compromised when sending powerful bass frequencies through a pedal.
The MIX begins with 100% discreet, pure class-A circuitry to ensure the natural tone of the instrument is maintained. On the connector panel, a simple effects loop with send and return ¼" jacks make connecting easy. A 'set & forget' recessed MIX control lets you adjust the exact balance between your 'dry' sound and the 'wet' effect so that you can add just a hair of distortion or a full-on grunge attack depending on your mood! This is augmented with a 180° polarity reverse switch that ensures the wet and dry signals are in phase with each other.
Like all Radial pedals the MIX is made road ready with 14 gauge steel construction, dual wafer potentiometers, double sided PC board and a heavy duty footswitch. Simply add a standard Boss-style' 9V supply and you are set to go!
The Radial BigShot MIX... an effects loop that lets you control effects just like a recording console.
RADIAL TONEBONE BIGSHOT MIX APPLICATIONS
Most guitar pedals tend to roll off bass frequencies to provide dynamics in the mid range. The MIX lets you retain the full bass spectrum and mix in the effects without sacrificing bottom end. Simply set the level control to mix in the wet signal.
Studios create interesting effects by combining wet and dry signals together. This is called 'parallel processing'. The MIX lets you do this with guitars. Imagine using distortion and only adding chorus to the top end. Creative products spur on new ideas and music!
Combine your clean acoustic guitar with a multi-effects processor to create exciting musical landscapes. The MIX retains the natural sound of your acoustic for better dynamics, less noise and a more pleasing tone. Set the effects out of phase for wide 'space-like' effects.
| SKU | RA-BIGSHOT-MIX |
| Barcode # | 676101036936 |
| Brand | Radial Engineering |
Our expert staff are always ready to answer any of your questions.
With years of hands-on experience to draw from, we take pride in giving our customers the best advice and support.
Copyright © 2024 QLD Sound and Lighting.
ABN: 87654212414
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern QLD Sound and Lighting’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘QLD Sound and Lighting’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Ereton Drive Arundel, QLD 4215. Our ABN is 87654212414. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
We want you to have a positive experience shopping with us, so we offer a 30 day returns policy should the product not be suitable.
Simply open a return request from your account on our site, or contact us by phone or email. We will then provide an RA (return authorisation) number and instructions on where to send the parcel.
Please note, returns are only accepted if the goods are unopened, with all packaging and any seals unbroken. If you've used or opened the product, we cannot sell it as new. I'm sure you'd agree when buying something you expect it to be brand new! The refund or credit will be minus our shipping and admin fees
Some items are exluded from this returns policy, including any product that may present hygeine issues. These products are deemed excluded at our discretion.
All products sold by this site come with a guarantee to be free of defects, in accordance with Australian Consumer Law.
However, please choose carefully as refunds are not usually provided when you have simply changed your mind, found it cheaper elsewhere, or made a wrong selection.
We reserve the right to accept any of these mentioned returns at our discretion, although restocking fees and administration fees may apply.
If goods have arrived damaged, please contact QLD Sound and Lighting by phone email at admin@soundlight.com.au within 24 hours of delivery.
We understand you may be wary providing your personal information and credit card details online, which is why we've taken a range of steps to ensure your details remain private.
We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
When shopping online, make sure you only provide personal or payment details to a secured site. You can tell if the site is secure by looking at the start of the addres bar, you will see a locked padlock icon. This shows that the site is encrypted and your information cannot be seen by any others.
In our checkout, at the top you'll notice a logo confirming the checkout process is safe. Feel free to click on that logo for more information, it will confirm the date and status of our checkout security.
Again, we do not store any card details, we don't even have access to them. The whole process is handled by e-way, who are the most secure payment processors there are.
Please feel free to get in touch if you have any concerns.
QLD Sound and Lighting is committed to providing quality services to you and this policy outlines our ongoing obligations to you in respect of how we manage your Personal Information.
We have adopted the Australian Privacy Principles (APPs) contained in the Privacy Act 1988 (Cth) (the Privacy Act). The NPPs govern the way in which we collect, use, disclose, store, secure and dispose of your Personal Information.
A copy of the Australian Privacy Principles may be obtained from the website of The Office of the Australian Information Commissioner at www.aoic.gov.au
Personal Information is information or an opinion that identifies an individual. Examples of Personal Information we collect include: names, addresses, email addresses, phone and facsimile numbers.
This Personal Information is obtained in many ways including via our website soundlight.com.au. We do not purchase information from any third parties (besides those related to our website - eg. order fulfilment apps), and we don’t guarantee website links or policy of authorised third parties.
We collect your Personal Information for the primary purpose of providing our services to you, providing information to our clients and marketing.
An example of how we may use this information is:
Using the mobile telephone number you provided when completing checkout to notify you that your order has been shipped, and to provide you with tracking information.
We may also use your Personal Information for secondary purposes closely related to the primary purpose, in circumstances where you would reasonably expect such use or disclosure. You may unsubscribe from our mailing/marketing lists at any time by contacting us in writing.
When we collect Personal Information we will, where appropriate and where possible, explain to you why we are collecting the information and how we plan to use it.
Sensitive information is defined in the Privacy Act to include information or opinion about such things as an individual's racial or ethnic origin, political opinions, membership of a political association, religious or philosophical beliefs, membership of a trade union or other professional body, criminal record or health information.
Sensitive information will be used by us only:
• For the primary purpose for which it was obtained
• For a secondary purpose that is directly related to the primary purpose
• With your consent; or where required or authorised by law.
Where reasonable and practicable to do so, we will collect your Personal Information only from you. However, in some circumstances we may be provided with information by third parties. In such a case we will take reasonable steps to ensure that you are made aware of the information provided to us by the third party.
We will not sell or provide your details to any person or business that isn't related to the transaction.
Your Personal Information may be disclosed in a number of circumstances including the following:
• Third parties where you consent to the use or disclosure; and
• Where required or authorised by law.
Your Personal Information is stored in a manner that reasonably protects it from misuse and loss and from unauthorized access, modification or disclosure.
When your Personal Information is no longer needed for the purpose for which it was obtained, we will take reasonable steps to destroy or permanently de-identify your Personal Information. However, most of the Personal Information is or will be stored in client files which will be kept by us for a minimum of 7 years.
You may access the Personal Information we hold about you and to update and/or correct it, subject to certain exceptions. If you wish to access your Personal Information, please contact us in writing.
QLD Sound and Lighting will not charge any fee for your access request, but may charge an administrative fee for providing a copy of your Personal Information.
In order to protect your Personal Information, we may require identification from you before releasing the requested information.
It is important to us that your Personal Information is up to date. We will take reasonable steps to make sure that your Personal Information is accurate, complete and up-to-date. If you find that the information we have is not up to date or is inaccurate, please advise us as soon as practicable so we can update our records and ensure we can continue to provide quality services to you.
This Policy may change from time to time and is available on our website.
If you have any queries or complaints about our Privacy Policy please contact us at:
QLD Sound and Lighting Pty Ltd
admin@soundlight.com.au
