Warm Audio Direct Box Active DI Box

WARM AUDIO DIRECT BOX ACTIVE 

Active DI Box with Custom CineMag Transformer 

Introducing the Warm Audio Direct Box Active - built around world-famous CineMag USA Transformer topology and engineering.

It's like no other DI Box in the world.

This amazing little DI is constructed with top-tier discrete components housed in rugged aluminium chassis including switches, knobs and connectors that are all designed to withstand heavy abuse on the road or in the studio.

Features:

• Active direct box with CineMag transformer
• Converts a high-impedance, unbalanced signal to a low-impedance, balanced signal
• Leaves your instrument’s tone and clarity intact
• Variable pad from -3 dB to -30 dB lets you set an optimal input level to prevent distortion
• Ground lift switch helps eliminate buzz and hum caused by ground loops
• Route your amp signal to a live mixer or recording interface
• Intuitive front- and rear-panel layout
• Sturdy all-metal chassis can withstand the most rigorous use
• 1,600+ operational hours on a set of fresh, high-quality 9-volt batteries

Made With USA Custom CineMag Transformer

Every aspect of our direct boxes are designed for maximum sonic integrity, from the custom-wound CineMag USA transformer to the rugged metal knob and switches.

You can expect warm, rich tone even after long cable runs, and the extruded aluminium enclosure ensures a long life span.

When you need to convert an instrument-level signal to mic-level, with sonic quality as your top priority, you'll be well-served with the Direct Box Active from Warm Audio.

New DI Box Experience

Warm Audio DI boxes offer the rare versatility of having an onboard variable pad knob which attenuates your input signal all the way from -3 dB to -30 dB, which will easily tame any instrument input source.

Both of our Direct Boxes offer a Thru-put jack that is jumpered to the input jack. It is a convenience jack allowing you to send your instrument's signal to a second place in addition to the live mixer or recording device.

Our Direct Boxes can also take a recorded signal at line level and send it to another line input while simultaneously sending signal out of the XLR mic level output of the Direct Box.

Typical Applications For A DI Box

A DI Box is needed for connecting electronic instruments such as guitar, bass, keyboard, or drum machines directly to a PA or recording system.

Simply put, a DI box converts the high impedance, unbalanced output signals to low impedance, balanced output signals.

By doing so, the instrument signals are now converted to the proper voltage level for the PA or recording system - which greatly reduces and/or eliminates connections which could cause tonal shifts and distortion.

Passive Or Active?

Direct Box Active is best for instruments with passive pickups, especially acoustic instruments. The Direct Box Active can also operate in "passive" mode.

Direct Box Passive is best for balancing the signal of instruments with active electronics, but still performs extremely well on passive pickups by producing a frequency range that exceeds the bandwidth of most passive DI boxes on the market.

For more information, Click Here to visit the Manufacturer's Website