Kali Audio LP-8 2nd Wave 100 Watt 8 Inch Studio Monitor - Each
RRP $599.00
8% OFF
RRP $599.00
8% OFF
LP-8-II
LP-8-II
Orders made before 2pm Ship Same Day!
KALI AUDIO LP-8 2ND WAVE
100 Watt, 8" 2 Way Active Nearfield Studio Monitor (Each)
Kali's celebrated LP-8 studio monitors just got a major upgrade, with improvements in the noise floor, output level, frequency response, and distortion.
Kali Audio's Lone Pine Series studio monitors are designed to allow you to hear every detail that's happening in your mix.
This starts with an exceptionally accurate frequency response. Whatever is present on your mix is what you'll hear in these monitors. Nothing is boosted or suppressed to cover flaws or try to sound more pleasing.
With the LP-6 and LP-8, you can mix with more confidence, and you can also be assured that your mix will translate as best as possible to whatever systems your audience is using.
The 2nd Wave goes even further, utilising a more robust DSP for an even flatter frequency response on the top end.
The LPs have always been praised for their accuracy, and we're pleased to share that the 2nd Wave versions realise slight but noticeable improvements in that regard, particularly on the top end.
Kali Audio defines a listening distance as the maximum distance at which the speakers can play continuously at 85 dB while maintaining 20 dB dynamic headroom.
This means that anywhere within that listening distance, you can listen for long periods of time at reference volume, and momentary peaks such as bass drops or explosion effects will come through clearly and with minimal distortion.
The LP-6 has enough output for most 1-2 person setups, and the LP-8 can handle larger setups easily.
Full output specifications, along with maximum listening distances, can be found in our user's manual.
Bass on the LP-Series monitors is delivered by larger magnets and larger voice coils than any comparable speakers on the market. This gives you more accurate bass response that extends lower, so you can dial in exactly the low end sound you need.
Bass response is not boosted or overhyped, but you can be sure that you're hearing the bass that you have on the track.
Protective limiters prevent harmful voltage from ever reaching the drivers, so there is no risk of blowing these speakers. These have been updated for the 2nd Wave, allowing for 3 dB higher output.
Both models use 40W for the 1" soft dome tweeter. The LP-6 uses 40W for the 6.5-Inch woofer, and the LP-8 uses 60W for the 8-Inch woofer.
A speaker's given position in a space can drastically change it's frequency response. A speaker placed against a wall or on a desk will sound very different than a speaker placed on a stand, even in a well-treated space.
Hard surfaces like walls, desk tops, and recording consoles can change the low end frequency response of the monitor, and degrade the overall clarity of the sound.
Happily, most of the common positions are fairly predictable and easily corrected.
Kali's team did our Boundary EQ tuning at The Village Studios in Los Angeles, and came up with boundary compensation EQ settings to help you get the optimum sound for where you need to put your speakers.
For the 2nd Wave, the boundary EQs have been updated for using the speakers on a desk with monitor stands.
Combined with the LF and HF trims, this will ensure that the speakers sound their best no matter what room you're mixing in, or where the speakers are placed.
The LP-6 and LP-8 both feature balanced XLR and TRS inputs, and an unbalanced RCA input.
The RCA input can be set to -10 dBu sensitivity when you're using consumer devices like a laptop or smartphone's headphone jack.
The waveguide on the Lone Pine Series studio monitors ensures that the directivity of the loudspeaker is smooth throughout its frequency response. What's more: it's calibrated so that the sound power of the loudspeaker helps you to perceive sound accurately.
In practical terms, what this means is that you're hearing spatial details in the recording that allow your brain to place elements of the recording in the space around you. This gives the speakers a more natural, lifelike feel that exposes more of the detail of the material that you're working on.
This level of detail makes it easier to make critical decisions, as well as making these monitors pleasurable to mix on and listen to in general.
We wanted to put a port on the front of the LP-Series studio monitors so that they could be used in small spaces where they'd be placed against walls. At the same time, we didn't want noise from the front port to distract from the accuracy of the speaker, so we developed a special front port that doesn't make noise.
On most port tubes, air leaves at different speeds from different points of the opening, creating noisy turbulence. This turbulence can be heard as "œchuffing," or an audible air sound coming from the monitor. This sound will add to the noise floor and obscure the details of the low end.
The port tube on LP-6 was designed to ensure that all of the air leaves the port tube at the same velocity. This helps add to the low end response of the speaker, while keeping the bass clean, tight, and devoid of extra noise.
For more information, Click Here to visit the Manufacturer's Website
| SKU | LP-8-II |
| Model # | LP-8-II |
| Barcode # | 860132002514 |
| Brand | Kali Audio |
| Shipping Weight | 10.2500kg |
| Shipping Width | 0.490m |
| Shipping Height | 0.330m |
| Shipping Length | 0.360m |
| Shipping Cubic | 0.058212000m3 |
| Unit Of Measure | ea |
| Type | Studio Monitor |
| Connector B | XLR Male |
| Custom Bundle | No |
| Features | Active |
| Connectivity | Wired |
| Colour | Black |
| Connector A | XLR Female |
| MPN | LP-8 |
| Suitable For | Studio Recording |
| Model | Kali Audio LP-8 |
| Manufacturer Part Number | LP-8 |
| Brand | Kali Audio |
| Form Factor | Tabletop |
| Type | Studio Monitor |
KALI AUDIO LP-8 2ND WAVE
100 Watt, 8" 2 Way Active Nearfield Studio Monitor (Each)
Kali's celebrated LP-8 studio monitors just got a major upgrade, with improvements in the noise floor, output level, frequency response, and distortion.
Kali Audio's Lone Pine Series studio monitors are designed to allow you to hear every detail that's happening in your mix.
This starts with an exceptionally accurate frequency response. Whatever is present on your mix is what you'll hear in these monitors. Nothing is boosted or suppressed to cover flaws or try to sound more pleasing.
With the LP-6 and LP-8, you can mix with more confidence, and you can also be assured that your mix will translate as best as possible to whatever systems your audience is using.
The 2nd Wave goes even further, utilising a more robust DSP for an even flatter frequency response on the top end.
The LPs have always been praised for their accuracy, and we're pleased to share that the 2nd Wave versions realise slight but noticeable improvements in that regard, particularly on the top end.
Kali Audio defines a listening distance as the maximum distance at which the speakers can play continuously at 85 dB while maintaining 20 dB dynamic headroom.
This means that anywhere within that listening distance, you can listen for long periods of time at reference volume, and momentary peaks such as bass drops or explosion effects will come through clearly and with minimal distortion.
The LP-6 has enough output for most 1-2 person setups, and the LP-8 can handle larger setups easily.
Full output specifications, along with maximum listening distances, can be found in our user's manual.
Bass on the LP-Series monitors is delivered by larger magnets and larger voice coils than any comparable speakers on the market. This gives you more accurate bass response that extends lower, so you can dial in exactly the low end sound you need.
Bass response is not boosted or overhyped, but you can be sure that you're hearing the bass that you have on the track.
Protective limiters prevent harmful voltage from ever reaching the drivers, so there is no risk of blowing these speakers. These have been updated for the 2nd Wave, allowing for 3 dB higher output.
Both models use 40W for the 1" soft dome tweeter. The LP-6 uses 40W for the 6.5-Inch woofer, and the LP-8 uses 60W for the 8-Inch woofer.
A speaker's given position in a space can drastically change it's frequency response. A speaker placed against a wall or on a desk will sound very different than a speaker placed on a stand, even in a well-treated space.
Hard surfaces like walls, desk tops, and recording consoles can change the low end frequency response of the monitor, and degrade the overall clarity of the sound.
Happily, most of the common positions are fairly predictable and easily corrected.
Kali's team did our Boundary EQ tuning at The Village Studios in Los Angeles, and came up with boundary compensation EQ settings to help you get the optimum sound for where you need to put your speakers.
For the 2nd Wave, the boundary EQs have been updated for using the speakers on a desk with monitor stands.
Combined with the LF and HF trims, this will ensure that the speakers sound their best no matter what room you're mixing in, or where the speakers are placed.
The LP-6 and LP-8 both feature balanced XLR and TRS inputs, and an unbalanced RCA input.
The RCA input can be set to -10 dBu sensitivity when you're using consumer devices like a laptop or smartphone's headphone jack.
The waveguide on the Lone Pine Series studio monitors ensures that the directivity of the loudspeaker is smooth throughout its frequency response. What's more: it's calibrated so that the sound power of the loudspeaker helps you to perceive sound accurately.
In practical terms, what this means is that you're hearing spatial details in the recording that allow your brain to place elements of the recording in the space around you. This gives the speakers a more natural, lifelike feel that exposes more of the detail of the material that you're working on.
This level of detail makes it easier to make critical decisions, as well as making these monitors pleasurable to mix on and listen to in general.
We wanted to put a port on the front of the LP-Series studio monitors so that they could be used in small spaces where they'd be placed against walls. At the same time, we didn't want noise from the front port to distract from the accuracy of the speaker, so we developed a special front port that doesn't make noise.
On most port tubes, air leaves at different speeds from different points of the opening, creating noisy turbulence. This turbulence can be heard as "œchuffing," or an audible air sound coming from the monitor. This sound will add to the noise floor and obscure the details of the low end.
The port tube on LP-6 was designed to ensure that all of the air leaves the port tube at the same velocity. This helps add to the low end response of the speaker, while keeping the bass clean, tight, and devoid of extra noise.
For more information, Click Here to visit the Manufacturer's Website
| SKU | LP-8-II |
| Model # | LP-8-II |
| Barcode # | 860132002514 |
| Brand | Kali Audio |
| Shipping Weight | 10.2500kg |
| Shipping Width | 0.490m |
| Shipping Height | 0.330m |
| Shipping Length | 0.360m |
| Shipping Cubic | 0.058212000m3 |
| Unit Of Measure | ea |
| Type | Studio Monitor |
Our expert staff are always ready to answer any of your questions.
With years of hands-on experience to draw from, we take pride in giving our customers the best advice and support.
Copyright © 2024 QLD Sound and Lighting.
ABN: 87654212414
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern QLD Sound and Lighting’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘QLD Sound and Lighting’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Ereton Drive Arundel, QLD 4215. Our ABN is 87654212414. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
We want you to have a positive experience shopping with us, so we offer a 30 day returns policy should the product not be suitable.
Simply open a return request from your account on our site, or contact us by phone or email. We will then provide an RA (return authorisation) number and instructions on where to send the parcel.
Please note, returns are only accepted if the goods are unopened, with all packaging and any seals unbroken. If you've used or opened the product, we cannot sell it as new. I'm sure you'd agree when buying something you expect it to be brand new! The refund or credit will be minus our shipping and admin fees
Some items are exluded from this returns policy, including any product that may present hygeine issues. These products are deemed excluded at our discretion.
All products sold by this site come with a guarantee to be free of defects, in accordance with Australian Consumer Law.
However, please choose carefully as refunds are not usually provided when you have simply changed your mind, found it cheaper elsewhere, or made a wrong selection.
We reserve the right to accept any of these mentioned returns at our discretion, although restocking fees and administration fees may apply.
If goods have arrived damaged, please contact QLD Sound and Lighting by phone email at admin@soundlight.com.au within 24 hours of delivery.
We understand you may be wary providing your personal information and credit card details online, which is why we've taken a range of steps to ensure your details remain private.
We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
When shopping online, make sure you only provide personal or payment details to a secured site. You can tell if the site is secure by looking at the start of the addres bar, you will see a locked padlock icon. This shows that the site is encrypted and your information cannot be seen by any others.
In our checkout, at the top you'll notice a logo confirming the checkout process is safe. Feel free to click on that logo for more information, it will confirm the date and status of our checkout security.
Again, we do not store any card details, we don't even have access to them. The whole process is handled by e-way, who are the most secure payment processors there are.
Please feel free to get in touch if you have any concerns.
QLD Sound and Lighting is committed to providing quality services to you and this policy outlines our ongoing obligations to you in respect of how we manage your Personal Information.
We have adopted the Australian Privacy Principles (APPs) contained in the Privacy Act 1988 (Cth) (the Privacy Act). The NPPs govern the way in which we collect, use, disclose, store, secure and dispose of your Personal Information.
A copy of the Australian Privacy Principles may be obtained from the website of The Office of the Australian Information Commissioner at www.aoic.gov.au
Personal Information is information or an opinion that identifies an individual. Examples of Personal Information we collect include: names, addresses, email addresses, phone and facsimile numbers.
This Personal Information is obtained in many ways including via our website soundlight.com.au. We do not purchase information from any third parties (besides those related to our website - eg. order fulfilment apps), and we don’t guarantee website links or policy of authorised third parties.
We collect your Personal Information for the primary purpose of providing our services to you, providing information to our clients and marketing.
An example of how we may use this information is:
Using the mobile telephone number you provided when completing checkout to notify you that your order has been shipped, and to provide you with tracking information.
We may also use your Personal Information for secondary purposes closely related to the primary purpose, in circumstances where you would reasonably expect such use or disclosure. You may unsubscribe from our mailing/marketing lists at any time by contacting us in writing.
When we collect Personal Information we will, where appropriate and where possible, explain to you why we are collecting the information and how we plan to use it.
Sensitive information is defined in the Privacy Act to include information or opinion about such things as an individual's racial or ethnic origin, political opinions, membership of a political association, religious or philosophical beliefs, membership of a trade union or other professional body, criminal record or health information.
Sensitive information will be used by us only:
• For the primary purpose for which it was obtained
• For a secondary purpose that is directly related to the primary purpose
• With your consent; or where required or authorised by law.
Where reasonable and practicable to do so, we will collect your Personal Information only from you. However, in some circumstances we may be provided with information by third parties. In such a case we will take reasonable steps to ensure that you are made aware of the information provided to us by the third party.
We will not sell or provide your details to any person or business that isn't related to the transaction.
Your Personal Information may be disclosed in a number of circumstances including the following:
• Third parties where you consent to the use or disclosure; and
• Where required or authorised by law.
Your Personal Information is stored in a manner that reasonably protects it from misuse and loss and from unauthorized access, modification or disclosure.
When your Personal Information is no longer needed for the purpose for which it was obtained, we will take reasonable steps to destroy or permanently de-identify your Personal Information. However, most of the Personal Information is or will be stored in client files which will be kept by us for a minimum of 7 years.
You may access the Personal Information we hold about you and to update and/or correct it, subject to certain exceptions. If you wish to access your Personal Information, please contact us in writing.
QLD Sound and Lighting will not charge any fee for your access request, but may charge an administrative fee for providing a copy of your Personal Information.
In order to protect your Personal Information, we may require identification from you before releasing the requested information.
It is important to us that your Personal Information is up to date. We will take reasonable steps to make sure that your Personal Information is accurate, complete and up-to-date. If you find that the information we have is not up to date or is inaccurate, please advise us as soon as practicable so we can update our records and ensure we can continue to provide quality services to you.
This Policy may change from time to time and is available on our website.
If you have any queries or complaints about our Privacy Policy please contact us at:
QLD Sound and Lighting Pty Ltd
admin@soundlight.com.au
