Behringer FLOW 8 Digital Mixing Console with Bluetooth and FX
$499.00
450643
Available Stock: 5
Dispatched within 48 Hours
Ships Directly to You!
Notify me when back in stock
Please tick this box to proceed.
450643
Ships Directly to You!
BEHRINGER FLOW 8
8-Input Digital Mixer with Bluetooth Audio and App Control, 60 mm Channel Faders, 2 FX Processors and USB/Audio Interface
Digital mixers offer studio quality processing, highest fidelity, total recall of all settings and even remote operation.
Those are hugely attractive features, but they all come at a cost - with bigger physical size, more complex operation requiring at least some degree of audio technical education.
The millions of analog small format mixers that Behringer has built over the years clearly tell us that there are many users who need a mixer that is compact, affordable, dependable and easy to operate.
Typical applications very often just need to balance the level of a handful of sources.
So, why making things more complicated than they need to be?
It is time for something genuinely new providing modern features and workflows to everyone in a simple and light form – it is time for FLOW 8 digital mixing.
Have you ever heard someone say, “you need to pay attention to your gain staging”? Do you know what the “gain structure” is about?
When you are interested in clean and healthy signals, with low noise and low harmonic distortion, then adjusting the right amount of preamp gain is paramount.
It is defining the amount of amplification a signal gets when entering the mixer. Since source signals can be anything from a strong hit on the snare drum, to the subtle hum of bees, there is not one gain fitting all possible purposes.
Gain staging is always a compromise and finding the right one requires either experience and technical knowledge, or the new FLOW 8 EZ-GAIN feature.
The function can monitor signals on one or all channels at the same time, until you think the loudest sounds have been put to it. EZ GAIN will then automatically adjust the channel gain to the optimum headroom.
Oh, by the way, EZ GAIN will automatically engage the 48 V phantom power on mic inputs 1/2 when no signal is coming in, just in case you forgot to do that. It will switch it off again if no signal is coming in still.
Let’s face it, small mixers are more often placed where cables end, rather than in a position where it would be most useful for controlling the mix. You may have to stretch out for controlling levels or walk away from the mixer to judge if your adjustment has the desired effect.
No longer!
FLOW 8 mixers offer full remote control from basically any Android or iOS device, giving you the freedom to go exactly where the sound is ideal for making any sort of adjustment.
Tweak the 9-band EQ for the main PA speakers, set the compressor on the bass guitar or adjust the mix for the talents on stage…
Are you new to the world of audio and not sure which signal to put into the right inputs? Don’t know how to use the EQ or compressor for dedicated signals?
No problem, the FLOW 8 app provides you with a unique setup wizard that takes you step by step to make your music shine.
After selecting the type of input the assistant will offer you presets and tell you where to plug the cables in. Thanks to this innovative feature you can add your instruments and microphones even though you are no expert yet.
Are you recording a podcast one day and some vocals the other? Are you mixing multiple artists at the same gig?
The Behringer FLOW 8 is your permanent companion for various audio applications and provides perfectly tweaked presets readily available at your fingertips.
Then the integrated snapshot library and the possibility to store unlimited snapshots per FLOW 8 app gives you instant, unlimited power.
STORE, EDIT and LOAD mixer settings via the hardware or app instantaneously. You can even trigger snapshot loading with a connected footswitch to bring your performance to life.
While the hardware provides 15 internal storage-slots for presets, the app can store an unlimited number of snapshots sorted by name, date and time.
With two Midas microphone preamps and internal 32 VFP-Processing FLOW 8 joins the X32, X-Air and WING series of digital mixing consoles.
Even though the form factor and number of I/O is specifically tailored to smaller setups, each individual channel offers crystal clear audio and keeps up with its ancestors’ sound quality.
All channels offer 4-band EQ, compression, as well as 2 FX and 2 monitor sends. All the monitor and main buses feature 9-band EQ and a limiter for preventing unexpected volume peaks on your speakers.
There is reverb and then there is REVERB. FLOW 8 features two independent studio-grade effects engines, each with 16 presets for refining your instruments and vocals with breathtaking effects sounds and depth.
12 Reverb programs span from a very short yet lively Ambience to very long and smooth Temple or Stadium simulations. All of them come in two flavors and their decay time can be adjusted continuously.
In addition to that you will get various delay and modulation effects for all styles and applications.
Since compact loudspeakers are dominating the consumer market, bluetooth has established itself as a standard for audio-connections in the consumer world.
Mini-jack sockets are being replaced more and more and many smartphones and tablets require special adapters to output analogue audio signals.
Therefore, FLOW 8 offers an integrated Bluetooth receiver, that enables you to comfortably play music in between performances without annoying adapters and the need of being close to the mixing console all the time.
The BT audio connection for playing audio back can be connected independently from the FLOW 8 remote application. While using BT Audio for playback on one mobile device, BT LE can be used separately on another device for the control application, if you wish.
The optional FLOW 8 CLAMP is based on the original TC Helicon Perform Series side cap design, using a special material that combines extreme longevity and a dependable, firm connection with the mic stand.
It consists of a metal bracket that is screwed to the mixer and the proprietary plastic part that clips on to the mic-stand without any screws. You can choose to mount the clamp to the bracket in 3 angles (0°, 15°, 30°) depending on your preferred mixer orientation.
The FLOW 8 CLAMP is designed to bring your FLOW 8 mixer within reach during your performance.
On stage for a small club gig or in a recording setup, the best place will often be right at your microphone stand. It avoids unnecessary cable clutter and keeps the control surface of your FLOW 8 mixer permanently accessible.
The clamp is designed for standard 5/8” microphone stands diameter (not exceeding 16.5 mm).
The internal USB interface offers 10 recording tracks and 2 additional playback channels. All input signals can be individually recorded and post-processed. This makes FLOW 8 the ideal partner for DAW home recording with zero-latency monitoring, streaming and podcasting.
No additional USB audio interface required.
All Input signals and the Main stereo mix can be sent to audio applications on a Mac-, Windows or Linux System for recording, editing or streaming.
Whether you’re a singer, songwriter, small ensemble, teacher or presenter, gamer, podcaster or video blogger, producing at home or playing live in bars, café houses or in the streets, when practicing or performing…
FLOW 8 will ensure impeccable audio quality and help you create amazing sound with ease.
For more information, Click Here to visit the Manufacturer's Website
SKU | 450643 |
Model # | FLOW 8 |
Barcode # | 653341353634 |
Brand | Behringer |
Shipping Weight | 1.4000kg |
Shipping Width | 0.348m |
Shipping Height | 0.094m |
Shipping Length | 0.223m |
Shipping Cubic | 0.007294776m3 |
Unit Of Measure | ea |
Type | Digital Mixer |
Type | Mixing Console |
MPN | FLOW 8 |
Model | FLOW 8 |
3 Years
BEHRINGER FLOW 8
8-Input Digital Mixer with Bluetooth Audio and App Control, 60 mm Channel Faders, 2 FX Processors and USB/Audio Interface
Digital mixers offer studio quality processing, highest fidelity, total recall of all settings and even remote operation.
Those are hugely attractive features, but they all come at a cost - with bigger physical size, more complex operation requiring at least some degree of audio technical education.
The millions of analog small format mixers that Behringer has built over the years clearly tell us that there are many users who need a mixer that is compact, affordable, dependable and easy to operate.
Typical applications very often just need to balance the level of a handful of sources.
So, why making things more complicated than they need to be?
It is time for something genuinely new providing modern features and workflows to everyone in a simple and light form – it is time for FLOW 8 digital mixing.
Have you ever heard someone say, “you need to pay attention to your gain staging”? Do you know what the “gain structure” is about?
When you are interested in clean and healthy signals, with low noise and low harmonic distortion, then adjusting the right amount of preamp gain is paramount.
It is defining the amount of amplification a signal gets when entering the mixer. Since source signals can be anything from a strong hit on the snare drum, to the subtle hum of bees, there is not one gain fitting all possible purposes.
Gain staging is always a compromise and finding the right one requires either experience and technical knowledge, or the new FLOW 8 EZ-GAIN feature.
The function can monitor signals on one or all channels at the same time, until you think the loudest sounds have been put to it. EZ GAIN will then automatically adjust the channel gain to the optimum headroom.
Oh, by the way, EZ GAIN will automatically engage the 48 V phantom power on mic inputs 1/2 when no signal is coming in, just in case you forgot to do that. It will switch it off again if no signal is coming in still.
Let’s face it, small mixers are more often placed where cables end, rather than in a position where it would be most useful for controlling the mix. You may have to stretch out for controlling levels or walk away from the mixer to judge if your adjustment has the desired effect.
No longer!
FLOW 8 mixers offer full remote control from basically any Android or iOS device, giving you the freedom to go exactly where the sound is ideal for making any sort of adjustment.
Tweak the 9-band EQ for the main PA speakers, set the compressor on the bass guitar or adjust the mix for the talents on stage…
Are you new to the world of audio and not sure which signal to put into the right inputs? Don’t know how to use the EQ or compressor for dedicated signals?
No problem, the FLOW 8 app provides you with a unique setup wizard that takes you step by step to make your music shine.
After selecting the type of input the assistant will offer you presets and tell you where to plug the cables in. Thanks to this innovative feature you can add your instruments and microphones even though you are no expert yet.
Are you recording a podcast one day and some vocals the other? Are you mixing multiple artists at the same gig?
The Behringer FLOW 8 is your permanent companion for various audio applications and provides perfectly tweaked presets readily available at your fingertips.
Then the integrated snapshot library and the possibility to store unlimited snapshots per FLOW 8 app gives you instant, unlimited power.
STORE, EDIT and LOAD mixer settings via the hardware or app instantaneously. You can even trigger snapshot loading with a connected footswitch to bring your performance to life.
While the hardware provides 15 internal storage-slots for presets, the app can store an unlimited number of snapshots sorted by name, date and time.
With two Midas microphone preamps and internal 32 VFP-Processing FLOW 8 joins the X32, X-Air and WING series of digital mixing consoles.
Even though the form factor and number of I/O is specifically tailored to smaller setups, each individual channel offers crystal clear audio and keeps up with its ancestors’ sound quality.
All channels offer 4-band EQ, compression, as well as 2 FX and 2 monitor sends. All the monitor and main buses feature 9-band EQ and a limiter for preventing unexpected volume peaks on your speakers.
There is reverb and then there is REVERB. FLOW 8 features two independent studio-grade effects engines, each with 16 presets for refining your instruments and vocals with breathtaking effects sounds and depth.
12 Reverb programs span from a very short yet lively Ambience to very long and smooth Temple or Stadium simulations. All of them come in two flavors and their decay time can be adjusted continuously.
In addition to that you will get various delay and modulation effects for all styles and applications.
Since compact loudspeakers are dominating the consumer market, bluetooth has established itself as a standard for audio-connections in the consumer world.
Mini-jack sockets are being replaced more and more and many smartphones and tablets require special adapters to output analogue audio signals.
Therefore, FLOW 8 offers an integrated Bluetooth receiver, that enables you to comfortably play music in between performances without annoying adapters and the need of being close to the mixing console all the time.
The BT audio connection for playing audio back can be connected independently from the FLOW 8 remote application. While using BT Audio for playback on one mobile device, BT LE can be used separately on another device for the control application, if you wish.
The optional FLOW 8 CLAMP is based on the original TC Helicon Perform Series side cap design, using a special material that combines extreme longevity and a dependable, firm connection with the mic stand.
It consists of a metal bracket that is screwed to the mixer and the proprietary plastic part that clips on to the mic-stand without any screws. You can choose to mount the clamp to the bracket in 3 angles (0°, 15°, 30°) depending on your preferred mixer orientation.
The FLOW 8 CLAMP is designed to bring your FLOW 8 mixer within reach during your performance.
On stage for a small club gig or in a recording setup, the best place will often be right at your microphone stand. It avoids unnecessary cable clutter and keeps the control surface of your FLOW 8 mixer permanently accessible.
The clamp is designed for standard 5/8” microphone stands diameter (not exceeding 16.5 mm).
The internal USB interface offers 10 recording tracks and 2 additional playback channels. All input signals can be individually recorded and post-processed. This makes FLOW 8 the ideal partner for DAW home recording with zero-latency monitoring, streaming and podcasting.
No additional USB audio interface required.
All Input signals and the Main stereo mix can be sent to audio applications on a Mac-, Windows or Linux System for recording, editing or streaming.
Whether you’re a singer, songwriter, small ensemble, teacher or presenter, gamer, podcaster or video blogger, producing at home or playing live in bars, café houses or in the streets, when practicing or performing…
FLOW 8 will ensure impeccable audio quality and help you create amazing sound with ease.
For more information, Click Here to visit the Manufacturer's Website
3 Years
SKU | 450643 |
Model # | FLOW 8 |
Barcode # | 653341353634 |
Brand | Behringer |
Shipping Weight | 1.4000kg |
Shipping Width | 0.348m |
Shipping Height | 0.094m |
Shipping Length | 0.223m |
Shipping Cubic | 0.007294776m3 |
Unit Of Measure | ea |
Type | Digital Mixer |
Our expert staff are always ready to answer any of your questions.
With years of hands-on experience to draw from, we take pride in giving our customers the best advice and support.
Copyright © 2024 QLD Sound and Lighting.
ABN: 87654212414
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern QLD Sound and Lighting’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘QLD Sound and Lighting’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Ereton Drive Arundel, QLD 4215. Our ABN is 87654212414. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
We want you to have a positive experience shopping with us, so we offer a 30 day returns policy should the product not be suitable.
Simply open a return request from your account on our site, or contact us by phone or email. We will then provide an RA (return authorisation) number and instructions on where to send the parcel.
Please note, returns are only accepted if the goods are unopened, with all packaging and any seals unbroken. If you've used or opened the product, we cannot sell it as new. I'm sure you'd agree when buying something you expect it to be brand new! The refund or credit will be minus our shipping and admin fees
Some items are exluded from this returns policy, including any product that may present hygeine issues. These products are deemed excluded at our discretion.
All products sold by this site come with a guarantee to be free of defects, in accordance with Australian Consumer Law.
However, please choose carefully as refunds are not usually provided when you have simply changed your mind, found it cheaper elsewhere, or made a wrong selection.
We reserve the right to accept any of these mentioned returns at our discretion, although restocking fees and administration fees may apply.
If goods have arrived damaged, please contact QLD Sound and Lighting by phone email at admin@soundlight.com.au within 24 hours of delivery.
We understand you may be wary providing your personal information and credit card details online, which is why we've taken a range of steps to ensure your details remain private.
We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
When shopping online, make sure you only provide personal or payment details to a secured site. You can tell if the site is secure by looking at the start of the addres bar, you will see a locked padlock icon. This shows that the site is encrypted and your information cannot be seen by any others.
In our checkout, at the top you'll notice a logo confirming the checkout process is safe. Feel free to click on that logo for more information, it will confirm the date and status of our checkout security.
Again, we do not store any card details, we don't even have access to them. The whole process is handled by e-way, who are the most secure payment processors there are.
Please feel free to get in touch if you have any concerns.
QLD Sound and Lighting is committed to providing quality services to you and this policy outlines our ongoing obligations to you in respect of how we manage your Personal Information.
We have adopted the Australian Privacy Principles (APPs) contained in the Privacy Act 1988 (Cth) (the Privacy Act). The NPPs govern the way in which we collect, use, disclose, store, secure and dispose of your Personal Information.
A copy of the Australian Privacy Principles may be obtained from the website of The Office of the Australian Information Commissioner at www.aoic.gov.au
Personal Information is information or an opinion that identifies an individual. Examples of Personal Information we collect include: names, addresses, email addresses, phone and facsimile numbers.
This Personal Information is obtained in many ways including via our website soundlight.com.au. We do not purchase information from any third parties (besides those related to our website - eg. order fulfilment apps), and we don’t guarantee website links or policy of authorised third parties.
We collect your Personal Information for the primary purpose of providing our services to you, providing information to our clients and marketing.
An example of how we may use this information is:
Using the mobile telephone number you provided when completing checkout to notify you that your order has been shipped, and to provide you with tracking information.
We may also use your Personal Information for secondary purposes closely related to the primary purpose, in circumstances where you would reasonably expect such use or disclosure. You may unsubscribe from our mailing/marketing lists at any time by contacting us in writing.
When we collect Personal Information we will, where appropriate and where possible, explain to you why we are collecting the information and how we plan to use it.
Sensitive information is defined in the Privacy Act to include information or opinion about such things as an individual's racial or ethnic origin, political opinions, membership of a political association, religious or philosophical beliefs, membership of a trade union or other professional body, criminal record or health information.
Sensitive information will be used by us only:
• For the primary purpose for which it was obtained
• For a secondary purpose that is directly related to the primary purpose
• With your consent; or where required or authorised by law.
Where reasonable and practicable to do so, we will collect your Personal Information only from you. However, in some circumstances we may be provided with information by third parties. In such a case we will take reasonable steps to ensure that you are made aware of the information provided to us by the third party.
We will not sell or provide your details to any person or business that isn't related to the transaction.
Your Personal Information may be disclosed in a number of circumstances including the following:
• Third parties where you consent to the use or disclosure; and
• Where required or authorised by law.
Your Personal Information is stored in a manner that reasonably protects it from misuse and loss and from unauthorized access, modification or disclosure.
When your Personal Information is no longer needed for the purpose for which it was obtained, we will take reasonable steps to destroy or permanently de-identify your Personal Information. However, most of the Personal Information is or will be stored in client files which will be kept by us for a minimum of 7 years.
You may access the Personal Information we hold about you and to update and/or correct it, subject to certain exceptions. If you wish to access your Personal Information, please contact us in writing.
QLD Sound and Lighting will not charge any fee for your access request, but may charge an administrative fee for providing a copy of your Personal Information.
In order to protect your Personal Information, we may require identification from you before releasing the requested information.
It is important to us that your Personal Information is up to date. We will take reasonable steps to make sure that your Personal Information is accurate, complete and up-to-date. If you find that the information we have is not up to date or is inaccurate, please advise us as soon as practicable so we can update our records and ensure we can continue to provide quality services to you.
This Policy may change from time to time and is available on our website.
If you have any queries or complaints about our Privacy Policy please contact us at:
QLD Sound and Lighting Pty Ltd
admin@soundlight.com.au